Abstract
AbstractThe paper reports the fabrication and characterization of a capacitive Microelectro Mechanical Systems pressure sensor based on through glass vias (TGV), which had a large dynamic range by operating in touch mode. The substrate with TGV offers the advantage of elimination of parasitic capacitances owing to the superior insulation property of glass. The fabrication process was introduced. In particular, anodic bonding was applied in high vacuum to realize the hermetic package to obtain large operating range and high sensitivity. The performance of the sensor with a sensitive diaphragm of 700 μm × 1400 μm was characterized in the pressure range from −80 to 180 kPa. The sensitivity was determined as 0.072 pF/kPa over the range of 160 kPa with a good linearity of 97%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
