Research of influence of thermal loadings on reliability of gas-diesel engines of transport and technological machines

Abstract

Introduction: the factors determining the development trends of the machine-building industry on the example of modernization of the internal combustion engine are considered. The evaluation of the effectiveness of cooperation between manufacturers and the scientific potential of leading scientists in the development of designs of gas-diesel engines. The requirement of time of increase of ecology of internal combustion engines is proved, the reasons braking mass introduction of gas-diesel engines for transport and technological cars are revealed. The parameter of influence on the thermal load of the piston group in gaseous fuel is allocated. The estimation of constructive perfection of development of system of cooling of the piston of the engine is given. The effects of increased temperature on individual parts of the piston in the form of scrapes, chips, causing failure of the internal combustion engine as a whole are shown. The influence of engine oil quality on the engine operation is revealed. It is proposed to Supplement the design of the internal combustion engine with an oil level control device, developed an algorite and a software product for calculating the residual life of the engine oil on key parameters, with the establishment of the term of their replacement.Methods: the study is based on the analysis of the works of leading domestic and foreign scientists in the field of improving the design of power equipment. The theoretical and methodological basis of the study was the system approach, methods of mathematical analysis, reliability theory, analytical and statistical processing of results.Results and discussion: the theoretical justification for the increased thermal load of piston in a gas-diesel engine, justifies the addition of the construction device control engine oil level and consideration of the resource and replacement intervals for the parameters of the actual physical and chemical condition, using the database presented in the software product.Conclusion: operation of gas-diesel engines requires from the operator more strict control over the temperature regime of the engine, the condition of the engine oil and the efficiency of the engine oil, the proposed solutions will allow to assess the quality of the engine oil in real time and to carry out its replacement according to the actual condition, which will ensure.