Research and Progress in Laser Welding of Wrought Aluminum Alloys. II. Metallurgical Microstructures, Defects, and Mechanical Properties

Abstract

With the wide application of aluminum alloys in automotive, aerospace, and other industries, laser welding has become a critical joining technique for aluminum alloys. In this review, the research and progress in laser welding of wrought aluminum alloys are critically discussed from different perspectives. The primary objective of the review is to understand the influence of welding processes on joint quality and to build up the science base of laser welding for the reliable production of aluminum alloy joints. Two main types of industrial lasers, carbon dioxide (CO2), and neodymium-doped yttrium aluminum garnet (Nd:YAG), are currently applied but special attention is paid to Nd:YAG laser welding of 5000 and 6000 series alloys in the keyhole (deep penetration) mode. In the preceding article of this review (part I), the laser welding processing parameters, including the laser-, process-, and material-related variables and their effects on welding quality, have been examined. In this part of the review, the metallurgical microstructures and main defects encountered in laser welding of aluminum alloys such as porosity, cracking, oxide inclusions, and loss of alloying elements are discussed from the point of view of mechanism of their formation, main influencing factors, and remedy measures. The main mechanical properties such as hardness, tensile and fatigue strength, and formability are also evaluated.