Abstract
The aim of this research is for decreasing contaminants using alginate beads with activated carbon entrapped (AG-AC) by adsorption. Different sunset yellow FCF concentrations were prepared in the laboratory. The effect of the different parameters was studied (pH, contact time, adsorbent dose, stirring rate, and concentrations) on the removal processes. The results were analyzed according to the Langmuir, Temkin, Freundlich, and Dubinin-Radushkevich adsorption isotherms. The removal efficiency is more appropriate by the Langmuir isotherm. Sunset yellow FCF (10 ppm) percent removal efficiency is (86%) at pH 3 and 10 g\L of the adsorbent dose for 30 min with a fixed stirring rate (100 rpm). The effect of different operating parameters was investigated using Linear regression analysis which occupies more than 97 % of the total of the variables affecting the removal process. Finally, I recommend using this technology for Removal of Sunset Yellow FCF.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.