Abstract
Stringent specifications for sulfur compounds content and the need to use oils with large amount of nitrogen compounds are challenges for fuel producers. Adsorption is an alternative process to remove sulfur and nitrogen compounds and clays are promising adsorbents for this removal. In this work, the adsorption performance of different commercial clays—Clay A (attapulgite), Clay B (bentonite), and Clay C (bentonite)—for the removal of sulfur and nitrogen compounds from a real diesel stream was studied through kinetic and isothermal experiments. The bentonite clays showed the best adsorptive capacity for the removal of sulfur and nitrogen compounds, probably due to the presence of Bronsted acid sites. The highest adsorption capacity was observed for Clay B: 0.174 mol kg–1 for sulfur compounds and 0.127 mol kg–1 for nitrogen compounds. Clay A was more selective to the removal of nitrogen compounds. Equilibrium data showed that adsorbate–absorbate and adsorbate–surface interactions predominate for sulfur and...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
