Abstract
The presence of sodium diclofenac (SD) in wastewater effluent, surface water and even in drinking water has prompted worldwide concerns due to the harmful effects of this pollutant to terrestrial and aquatic organisms. This study investigated the potential of activated carbon from cocoa pod husk (CPHAC) as a low-cost adsorbent for the removal of SD from aqueous solution. Characteristics of the unmodified and the CPHAC were evaluated using SEM, EDX, and FTIR analyses. The effects of pH, initial SD concentration, CPHAC dosage, and contact time in removing SD via adsorption were investigated using central composite design (CCD) of the response surface methodology (RSM) from Design Expert 7.0 software. The SD removal efficiency was observed to increase from 76.0% to 93.6% at decreasing pH and CPHAC dosage and increasing initial concentration. The optimum conditions to maximize SD removal were at pH 7, 30mgL−1 initial SD concentration, 0.25g CPHAC dosage, and 15min contact time. From batch experiments, the equilibrium time was achieved at 45min. Kinetic studies showed that the adsorption followed pseudo-second order reaction (R2=0.99998) and the analysis of the equilibrium data revealed that SD adsorption using CPHAC best fitted the Freundlich isotherm (R2=0.99707, n value of 4.34) compared to the Langmuir and Temkin models. The study demonstrated that activated carbon from CPH efficiently removed the SD in aqueous solution with adsorption capacity of 5.53mgg−1 at equilibrium.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.