Abstract
The aquatic plant, Lemna perpusilla Torr. strain, was dried, pulverized and used for Pb(II) removal from aqueous solution. Batch experiments were conducted to investigate the effects of pH, contact time, initial metal concentration and temperature on Pb(II) adsorption. A dose of 4gL−1 of dried L. perpusilla in a solution with an initial pH of 4.6, an initial Pb(II) concentration of 50mgL−1 and a contact time of 210min resulted in the maximum Pb(II) removal efficiency (above 95%). The equilibrium adsorption capacities increased with increasing initial Pb(II) concentration. The adsorption isotherm was better described by a Langmuir model rather than a Freundlich model. Further, the adsorption kinetics followed a pseudo-second-order model. An FTIR examination revealed changes between the natural and Pb(II)-loaded plant material. Scanning electron micrograph (SEM) also revealed changes in the surface morphology of the biomass as a result of lead adsorption. Based on these results, it can be concluded that the dried L. perpusilla is effective in removing lead from aqueous solution and merits consideration for scaled-up trials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.