Abstract
The efficiency of ozone treatment on the removal of three cyanotoxins in simulated Qatar tap water was evaluated. The reactivity of cyanotoxins with ozone followed the order as microcystin-LR (MLR) > cylindrospermopsin (CYN) > anatoxin-a (ANA). Approximately 70% of MLR, CYN and ANA were oxidized with an applied ozone dosage of 0.04 mg/L, 0.085 mg/L and 0.26 mg/L, respectively. Increased ozone dose greatly improved the oxidation efficiency, and a complete removal was achieved for all cyanotoxins. The level of pH affected the removal differently; highest removal rates were obtained at pH 5, pH 10 and pH 7.2 for MLR, ANA and CYN, respectively. There was no obvious effect of hydrogen peroxide addition on ozone treatment efficiency. Based on the calculated pseudo first order rate constants, the estimated ozone doses required for the 99.5% removal of 0.2 mg/L MLR, CYN and ANA were 0.12 mg/L, 0.22 mg/L and 1.3 mg/L, respectively.KeywordsCyanotoxinsOzoneAdvanced oxidationDrinking water
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
