Abstract
Removal of Cr (VI) from aqueous solutions by electrochemical reduction was studied using steel rods connected in unipolar mode. An aqueous solution of potassium dichromate was used as the model contaminant. Three different supporting electrolytes, viz. NaCl, NaNO 3 and Na 2SO 4 were used during electrolysis. Only NaCl was found to be effective to arrest the passivation of electrodes by Cr (VI). The effect of initial concentration of Cr (VI) and current density on chromium removal was investigated. The rate of conversion of Cr (VI) to chromite is fast at higher current densities and the sludge is contaminated with more iron oxide. X-ray diffraction studies have revealed the formation of chromite (FeCr 2O 4) as main product in the electrochemically precipitated sludge. Though chromite is a predominant species other products such as Cr 2O 3, Fe 2O 3 are also formed during the process. At low current densities the electrochemical reduction of Cr (VI) was found to be initially under current control and turns to diffusion control after certain time.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
