Abstract
In this work, paper waste sludge (PWS) collected from the primary settling tank of the paper wastewater treatment plant was utilized to generate hydrochar as a low-cost adsorbent for removal of Cr(VI) from aqueous solution. The characteristics of paper waste sludge hydrochar (PWSH) and the effects of adsorption conditions of Cr(VI) onto PWSH, including solution pH (3-9), contact time (5-240 min), initial Cr(VI) concentration (10-80 mg/L) and the adsorbent dose of 1 g/L at room temperature (25±2°C) were investigated. Adsorption isotherm and kinetics were also predicted in this work. The results indicate that the maximum adsorption capacity achieved 11.89 mg/g at 120 min of contact time, pH 3, and initial Cr(VI) concentration of 60 mg/L. The adsorption isotherm was reflected the best by the Langmuir model (R2 of 0.9968). Whereas, the adsorption kinetic also indicates that the pseudo-second-order model predicted the best for Cr(VI) adsorption process with a R2 of 0.9469. The mechanism of Cr(VI) adsorption process onto PWSH was chemical sorption through electrostatic interaction and ion exchange.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
