Abstract
The mechanism was discussed for the removal of boron by the hydroxyapatite (HAp) formation reaction using Ca(OH)2 and (NH4)2HPO4 in room temperature. Time required to remove boron was 20min by adding Ca(OH)2 and (NH4)2HPO4 for the remaining boron to below 1mg/L. The removal rate of boron was controlled by the HAp precipitate formation and the presence of ammonia. From the XRD patterns and SEM images, HAp could be confirmed in the precipitate product. The reaction between borate ions and calcium hydroxide was accelerated by dehydration with ammonia; the borate-calcium hydroxide compound coprecipitated with resulting HAp. Although the removal of boron decreased in the presence of sulfate, phosphate, and aluminum, these effects could be prevented by adding excess Ca(OH)2. Interference of fluoride ions was eliminated by adding Al3+. Sodium alpha-olefin sulfonate was the most effective coagulant for HAp precipitation. The proposed boron removal method has several advantages about treating time and ability of boron removal. The method was successfully applied to the real hot spring wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
