Abstract
In this study, regenerated cellulose membrane was used as a filter in liquid-phase polymer-based retention technique. The poly(4-vinyl-1-methylpyridinium bromide), P(BrVMP), was used as extracting reagent of As(V). The role of pH, polymer:As(V) molar ratio, and influence of regenerated cellulose membrane were investigated by washing method. It was observed that the efficient retention was obtained at pH 9 with 20:1 polymer:As molar ratio and it was about 100 % at Z = 10 for P(BrVMP). Experimental data showed that the regenerated cellulose membrane, compared to poly(ethersulfone) membrane, has a capacity to interact with As(V). The maximum retention capacity of P(BrVMP) was determined by enrichment method, and then, using alternately washing and enrichment methods, the charge–discharge process and recovery of P(BrVMP) were performed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.