Abstract
The adsorption and photocatalytic reduction of toxic Hg(II) in aqueous solutions were investigated at different temperatures using synthesized TiO2 nanoparticles and TiO2/montmorillonite. The synthesized materials were tested by TGA, BET, TEM and XRD methods. High-purity anatase TiO2 nanoparticles with an average diameter of 9.10nm were produced by the acid catalyzed sol–gel method at 500°C, and the specific surface area of synthesized TiO2 nanoparticles was in excess of 200m2g−1. TiO2/montmorillonite was prepared by slurry reactions, resulting in average pore size of 3.10nm with TiO2 nanoparticles on the montmorillonite surface. TiO2/montmorillonite with a 22wt% TiO2 load exhibited a specific surface area of 239m2g−1. Removal of Hg(II) in aqueous solutions at 25, 35 and 45°C in darkness and under UV illumination showed that the photocatalytic reduction of Hg(II) increased with increasing temperature, and a decline in adsorption was observed for a rise in temperature from 25 to 45°C, following the exothermicity of the adsorption process. The adsorption behavior of Hg(II) on TiO2 nanoparticles was well described by the Langmuir isotherm model, and the rates were simulated by the Elovich equation. A first-order reaction model was used to simulate the photocatalytic reduction reaction of Hg(II) in aqueous solutions, and a good fit was obtained with the experimental data.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
