RELIABILITY ANALYSIS OF SWITCH’S CONTROL SCHEMES

Abstract

Purpose. The purpose of this article is to conduct an analysis of the reliability of the control schemes of the electric arrow drive with the aim of optimizing and modernizing them to increase the reliability indicators. To show an approach to optimizing the control circuits of an electric turnout that is advantageous from an operational point of view, the implementation of fewer control circuits will minimize the number of failures. To demonstrate a principled circuit solution for optimizing the control circuit of an electric turner with the use of separate redundancy with always-on redundancy and integer multiplicity. Methods. During the research, methods of comparative analysis, synthesis, probability theory, and reliability theory were used. Findings. The paper analyzes the types of re-reservation as a way to increase the reliability of the arrow control scheme. A comparative study of the reliability of various options for reserving the turnout control scheme was carried out in comparison with the classic situation on the railways of Ukraine - the absence of a reserve. It has been proven that the use of separate redundancy with always-on reserve and integer multiplicity provides the maximum increase in reliability, but the significant amount of necessary equipment significantly reduces the economic attractiveness of this method. On the other hand, the use of separate redundancy with substitution and fractional multiplicity (sliding redundancy) gives a positive result only if one redundancy unit serves no more than 15 turnout electric drives, otherwise the overall reliability of the subsystem may decrease. The optimization of the arrow control subsystem at the station is proposed, which requires the use of only six arrow control schemes, one of which is a sliding reserve. The influence of different types of redundancy on the reliability indicators of the arrow control scheme is considered. The most effective option for optimizing the arrow control subsystem has been determined. Scientific novelty. The scientific novelty of the work consists in the well-founded sufficiency of using only six arrow control schemes in combination with the use of sliding redundancy of the arrow control scheme for the control of arrows when disbanding warehouses on the sorting slide. The proposed method makes it possible to increase the reliability of the arrow control subsystem while maintaining the operational parameters of the station. Practical significance. The practical significance of the results lies in the fact that when using the proposed optimization, the resource use of hill automation devices is improved, the maintenance process is simplified, and the total cost of equipment and maintenance costs are reduced.