Abstract
A simple, economical, and practical drop-weight impact testing machine was developed to determine the impact resistance for high-strength fiber-reinforced concrete (HSFRC) composite. Impact and compression tests were carried out on concrete cylinders reinforced with three different aspect ratios of hooked-end steel fibers l/ d (length/diameter): 60, 75, and 83 (30/0.50, 60/0.80, and 50/0.60 mm/mm), and four different percentages of steel fibers 0.5%, 1.0%, 1.5% and 2.0% by volume of concrete. For each aspect ratio and volume of fibers, complete stress–strain curves of HSFRC were generated in order to determine the total energy absorbed for each cylindrical specimen in compression. The addition of steel fibres to concrete has improved impact resistance and also the compression toughness. The test results showed that a logarithmic relation exists between compression toughness energy ( E Ct) by means of the generated stress–stress curves from the compressive tests and the impact energy (E I) by means of the modified impact machine for HSFRC at different l/ d ratio of 60, 75, and 83.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
