Rejection of Periodic Wind Disturbances on a Smart Rotor Test Section Using Lifted Repetitive Control

Abstract

A repetitive control method is presented that is implemented in real-time for periodic wind disturbance rejection for linear systems with multiple inputs and multiple outputs and with both repetitive and non-repetitive disturbance components. The novel repetitive controller can reject the periodic wind disturbances for fixed-speed wind turbines and variable-speed wind turbines operating above-rated and we will demonstrate this on an experimental “smart” rotor test section. The “smart” rotor is a rotor where the blades are equipped with a number of control devices that locally change the lift profile on the blade, combined with appropriate sensors and controllers. The rotational speed of wind turbines operating above-rated will vary around a defined reference speed, therefore methods are given to robustify the repetitive controllers for a mismatch in the period. The design of the repetitive controller is formulated as a lifted linear stochastic output-feedback problem on which the mature techniques of discrete linear control may be applied. For real-time implementation, the computational complexity can be reduced by exploiting the structure in the lifted state-space matrices. With relatively slow changing periodic disturbances it is shown that this repetitive control method can significantly reduce the structural vibrations of the “smart” rotor test section. The cost of additional wear and tear of the “smart” actuators are kept small, because a smooth control action is generated as the controller mainly focuses on the reduction of periodic disturbances.