Abstract
An approximate master curve for the densification of cold-pressed titanium powder during vacuum sintering was published previously. It was based on the combined results for three different titanium powders. The master densification curve model incorporates the effects of particle size, compaction pressure, sintering time, and sintering temperature on densification. The collection of a large amount of additional data now allows refinement of the model. Distinct curves are presented for three different titanium powders, prealloyed Ti6Al4V, and Ti-Ni binary alloys. The master densification curve is sigmoidal, but deviates from the ideal form at high sintered density; the relative sintered density saturates at 90 to 100 pct, depending on the particle size of the titanium powder, and to a lesser extent the compaction pressure. The master densification curve below the saturation level is slightly dependent on the compaction pressure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have