Abstract

Powders of gadolinium-doped ceria solid solutions, Ce 1− x Gd x O 2− δ ( x = 0.05, 0.1, 0.2, 0.3 and 0.4), were prepared by a freeze-drying precursor route. Dense ceramic pellets with average grain sizes in the range of several microns were obtained after sintering at 1600 °C. Cobalt nitrate was added to the powders to obtain dense ceramic samples with grain sizes in the submicrometer range at 1150 °C. The ionic conduction was analysed by impedance spectroscopy in air, to de-convolute the bulk and grain boundary contributions. The bulk conductivity at low temperature clearly decreases with increasing content of Gd whereas the activation energy increases. An alternative method is proposed to analyse the extent of defect interactions on conduction. For samples without addition of Co, the specific grain boundary conductivity increases with increasing Gd content. Addition of cobalt does not alter the bulk properties but produces an important increase in the specific grain boundary conductivity, mainly in samples with lower Gd-concentration ( x = 0.05 and 0.1). Segregation of Gd and its strong interaction with charge carriers may explain the blocking effects of grain boundaries.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call