Abstract

Cigarette butt is a hazardous waste, and its management faces many challenges. The generation of leachate containing many pollutants including heavy metals is one of the limitations of recycling cigarette butts. The aim of this study was to reduce organic compounds and heavy metals in leachate resulting from cigarette butt recycling in an electrocoagulation reactor. For this purpose, two samples, including freshly smoked cigarette butts and littered cigarette butts, were processed and the treatment of leachate resulting from them was studied in an electrocoagulation reactor. The efficiency of leachate treatment was investigated in the treatment time of 10-40min and current intensity of 20-100mA. The results showed that the minimum reduction of chemical oxygen demand and turbidity was 25.3% and 33.4%, respectively. Increasing the current intensity and treatment time increased the efficiency of removing turbidity and chemical oxygen demand up to 47.1% and 41.2%, respectively, in optimum conditions. The reduction of nickel, chromium, cadmium, and lead in the lowest current density and minimum treatment time was more than 90%, which increased to more than 99% with the increase of the current density and treatment time. The use of electrocoagulation is a suitable solution to reduce heavy metals in leachate resulting from cigarette butt recycling, while the proper reduction of organic compounds in this type of leachate requires further treatment processes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.