Reduction of rotorcraft BVI using synthetic jets; computational studies using LES

Abstract

In rotorcraft, the blade-vortex interaction (BVI) has been recognized as one of the main sources of noise and vibrations, affecting its aerodynamics performance and stability. Active and passive flow control techniques, for the reduction of BVI, have been investigated. The passive flow control techniques have proved to be inefficient due to the complex aerodynamics of rotorcraft. Thus, active flow control techniques has become of particular interest. In the present research we propose a novel approach, for the reduction of rotorcraft’s noise and vibrations due to BVI. The main idea of this approach is to inject air at the leading-edge of the blade to alter the characteristics (strength and core size) of the incoming vortex and thus, minimize the noise and vibrations associated with BVI. Computational studies are carried out using the large-eddy simulation (LES) with the dynamic Smagorisky sub-grid scale model. The computations are carried out for a flow of Reynolds number R e = 1.3 × 10 6 , based on the chord of NACA0012 airfoil and free-stream velocity. The studies show that injecting air at the leading edge of the blade, the influence of blade-vortex interaction on the aerodynamic coefficients is significantly reduced. Higher reduction of BVI effect, on the aerodynamic coefficients, was achieved with the increase of the speed of the synthetic jet. The reduction of the BVI, also, leads to the reduction of the vibrations.