Reducing uplink signal peakiness

Abstract

In cellular systems, the wireless communication service in a given geographical area is provided by multiple Node-Bs or base stations. The downlink transmissions in cellular systems are one-to-many, while the uplink transmissions are many-to-one. A one-to-many service means that a Node-B transmits simultaneous signals to multiple UEs in its coverage area. This requires that the Node-B has very high transmission power capability because the transmission power is shared for transmissions to multiple UEs. In contrast, in the uplink a single UE has all its transmission power available for its uplink transmissions to the Node-B. Typically, the maximum allowed downlink transmission power in cellular systems is 43 dBm, while the uplink transmission power is limited to around 24 dBm. This means that the total transmit power available in the downlink is approximately 100 times more than the transmission power from a single UE in the uplink. In order for the total uplink power to be the same as the downlink, approximately 100 UEs should be simultaneously transmitting on the uplink. Most modern cellular systems also support power control, which allows, for example, allocating more power to the cell-edge users than the cell-center users. This way, the cell range in the downlink can be extended because the Node-B can always allocate more power to the coverage-limited UE. However, in the uplink, the maximum transmission power is constrained by the maximum UE transmission power.