Abstract

We propose 1 state and 2 state multi-step Kalman filters (MKFs) to estimate and compensate CFO, LPN and NLPN in long-haul coherent fiber-optic communication systems. The proposed filters generate state estimates once every m symbols and therefore operate at a reduced sampling rate compared to conventional KFs that perform symbol by symbol processing. No computations are performed to obtain phase estimates of the intermediate m-1 samples; instead, the present and previous estimates are averaged and used to derotate the intermediate m-1 samples which are then demodulated to recover the transmitted symbols. This reduces the computational load on the receiver DSP. Further, in order to improve estimation accuracy, we adaptively vary the process noise covariance Q. Simulation results of 200 Gbps PDM 16 QAM system over 12 spans shows that the proposed 1 state MKF can reduce the sampling rate requirement by a factor of m = 20 with Q-factor degradation of 1.32 dB compared to single-step KF at linewidth of 100 kHz. The 2 state MKF tracks PN and CFO with a maximum step size of m=10 for a CFO of 100 MHz at linewidth of 100 kHz. We also study the dynamic performance of the proposed algorithms by applying step change to CFO. The 2 state MKF with adaptive Q is able to track a step change of 400 MHz of CFO with m = 1 and 3 with high estimation accuracy but slower convergence time compared to the non-adaptive 2 state MKF. Finally, we study the computational requirements of the proposed MKFs and show that they offer significant reduction in computations compared to single-step KF thus making the proposed filters suitable for hardware implementation.

Highlights

  • Carrier synchronization is essential to demodulation of advanced modulation formats such as quadrature amplitude modulation (QAM) in high-data rate coherent optical communication ­links[1]

  • Simulations are carried for long haul system (960 km) taking chromatic dispersion (CD), polarization mode dispersion (PMD) and nonlinearity in account. 1 state multi-step Kalman filters (MKFs) is concerned with tracking for phase noise (PN) and NLPN

  • Simulation results show that MKF with m upto 20 can be used with ≤ 1.5 dB loss and results are found to perform better than QPSK partioning scheme

Read more

Summary

OPEN Reduced sampling rate

We propose 1 state and 2 state multi-step Kalman filters (MKFs) to estimate and compensate CFO, LPN and NLPN in long-haul coherent fiber-optic communication systems. The proposed filters generate state estimates once every m symbols and operate at a reduced sampling rate compared to conventional KFs that perform symbol by symbol processing. Block K­ F15 and unscented KF a­ lgorithms[13] have been proposed for joint estimation of CFO and carrier phase offset but do not perform well when laser and nonlinear phase noise is present in the received symbols. These techniques are not studied for dynamic CFO estimation in which CFO changes suddenly to a new value during the transmission due to network issues. The forgetting factor controls the performance of the filter in terms of convergence speed and estimation accuracy

System model
Results and discussion
Computational complexity of MKFs
Conclusion
Additional information
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call