Abstract
Here we studied non-edible fat waste as a starting material to prepare eutectic mixtures of biomaterials. Initially, the fat was hydrolyzed using water and R. oryzae resting cells. The hydrolysis was performed in organic solvent-free media and the degree of hydrolysis at 1h was 42% while hydrolytic values of 86% and 98% were achieved at 12 and 48h, respectively. To recover the resting cells, they were extracted in consecutive cycles with solvents or supercritical CO2. Compared with solvents, supercritical CO2 allowed the highest reuse. Hence, R. oryzae was used for 336h (7 reaction cycles), yielding 56.5g of free fatty acid/g biocatalyst. Crude glycerol was recovered, showing a purity of 66.0% and an ash and water content of 2.3% and 1.8%, respectively. The hydrolyzed fat was crystallized with several solvents to yield palmitic and stearic acid mixtures with melting point characteristics of eutectic mixtures. We recovered 76% to 90% of the palmitic and stearic acids present in the initial hydrolyzed animal fat, depending on the solvent. The palmitic:stearic acid ratios determined by GC-FID were similar to those reported for eutectic mixtures whit phase change materials properties, as were the melting points, which ranged from 51.5°C to 54.8°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.