Abstract
This paper provides a technical approach for efficiently recovering Mg from ferronickel slag to produce high-quality magnesium oxide (MgO) by using the sulfuric acid leaching method under atmospheric pressure. The leaching rate of magnesium is 84.97% after a typical one-step acid leaching process, which is because Mg in FNS mainly exists in the forsterite (Mg2SiO4) phase, which is chemically stable. In order to increase the leaching rate, a two-step acid leaching process was proposed in this work, and the overall leaching rate reached up to 95.82% under optimized conditions. The response surface methodology analysis for parameter optimization and Mg leaching rules revealed that temperature was the most critical factor affecting the Mg leaching rate when the sulfuric acid concentration was higher than 2 mol/L, followed by acid leaching time. Furthermore, interactive behavior also existed between the leaching temperature and leaching time. The leaching kinetics of magnesium from FNS followed a shrinkage-nuclear-reaction model with composite control, which were chemically controlled at lower temperatures and diffusion controlled at higher temperatures; the corresponding apparent activation energy was 19.57 kJ/mol. The leachate can be used to obtain spherical-like alkali magnesium carbonate particles with diameters of 5–10 μm at 97.62% purity. By using a further calcination process, the basic magnesium carbonate can be converted into a light magnesium oxide powder with a particle size of 2–5 μm (MgO content 94.85%), which can fulfill first-level quality standards for industrial magnesium oxide in China.
Highlights
Ferronickel slag (FNS) is considered as the main solid wastes discharged from hightemperature smelting of laterite ores during the ferronickel production process
The present study proposed a mild and efficient route for the recovery of magnesium from ferronickel slag to prepare magnesium oxide
(1) The results of the mineralogical analysis showed that the main chemical components of the FNS were SiO2, magnesium oxide (MgO), and Fe2O3, mainly in forsterite form, with strong crystallinity and leaching out difficulty
Summary
Ferronickel slag (FNS) is considered as the main solid wastes discharged from hightemperature smelting of laterite ores during the ferronickel production process. Most have focused on applying ferronickel slag for making construction and building materials (e.g., cement, concrete, and geopolymers) because of the high contents of amorphous SiO2 [5,6,7,8,9], producing glass ceramics [10,11] and mineral wool [12] due to the glass and microcrystalline structure, and preparing forsterite refractory materials based on its higher MgO content [13,14,15,16] These application pathways have some shortcomings, such as complex processes, large initial investment, and low product quality, resulting in low efficiency of FNS utilization. This study proposed a feasible method for efficiently recovering Mg from ferronickel slag to prepare light magnesium oxide
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
