Abstract
A pellet reactor (PR) was used to investigate the ability for zinc recovery from electroplating wastewater. The pellet reactor is a fluidized bed reactor, in which the nucleated precipitation of heavy metals occurred on the surface of seeding material. The zinc removal efficiency was 75% at molar ratio [CO3 2-]/[Zn2+] of 2.5, the flowrate of 16 L/h, sand’s diameter of 0.25 – 0.5 mm, and sand’s mass of 50 g. The elemental analysis of zinc carbonate and zinc hydroxide crystallization was analyzed by X-ray energy dispersive spectrometer (EDS) and the surface was characterised by Scanning electron microscope (SEM) to get the morphological observation of the pellets after 38-day operation. This study demonstrated that the fluidized bed reactor can be considered a feasible method for zinc removal efficiency from electroplating wastewater to achieve sustainable development.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
