Abstract
In this paper, a reconfigurable modified Wilkinson Power Divider (WPD) was proposed. The operating frequencies of the proposed design were either at 2.5 GHz or 3.5 GHz for Worldwide Interoperability for Microwave Access (WiMAX) applications. This proposed design is reconfigurable in terms of its operating frequency by using PIN diode switches. PIN diode switch was used in this design to reconfigure the microstrip line length. By varying the bias voltage of the PIN diode to +5 V or -5 V, the proposed modified WPD can either operate at 2.5 GHz or 3.5 GHz. Rogers RO4350 (er=3.48, h=0.508 mm) was chosen as the substrate material and copper (thickness=0.035 mm) related to patch of design. Based on simulation results obtained from the Advanced Design System (ADS) software, the modified WPD shows good S-parameter performances at 2.5 GHz and 3.5 GHz. However, the measurement results exhibit frequency shifted. Even though there is a correlation between measurement results and simulation results, the resonant frequency was shifted due to parasitic reactance of the PIN diode.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of Electrical Engineering and Informatics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
