Abstract
This paper introduces a reconfigurable front-end system that consists of a RF chip and two data processors (DPs). The system has the capability of reading BD/DVD/CDs and recording BD/DVDs. It can be implemented with a RF chip and a BD DP for BD mode and a RF chip and a DVD/CD DP for DVD/CD mode. The newly developed RF chip can process CD, DVD and BD. The presented BD DP can access the BD-R/ROM/RE at 2x speed. The adaptive partial response maximum likelihood (PRML) and optimum power control (OPC) algorithms for improving play ability and recordability of BDs are developed. Due to the proposed adaptive PRML, less than 2 times 10-4 of bit error rate (BER) is achieved with the tilt margin of ±0.6°. The presented OPC algorithm can reduce to the power errors of less than 3 percent in 3 seconds. The developed reconfigurable front-end system is fully verified with real BD/DVD/CDs. Three main chipset of front-end system is fabricated. A RF chip is fabricated in 0.65μm Bi-CMOS process technology and two DPs are fabricated in 0.18μm CMOS process technology.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
