Recognition, classification and mechanical description of debris flows

Abstract

Various types of flow or mass movement involving water and sediments occur on steep slopes in mountainous areas. Among them, debris flows are peculiar events during which a large volume of a highly concentrated viscous water-debris mixture flows through a stream channel. Throughout the world these phenomena cause considerable damage but remain poorly understood although a basic knowledge is already available concerning their recognition and propagation. Firstly, a synthesis of the useful practical criteria of recognition is proposed. Debris flows must be seen as intermediate phenomena between hyperconcentrated flows (intense bed load transport) and landslides separated from them by sharp transitions of some characteristics (celerity, deposit nature and flow type). Two parameters, solid fraction and material type, thought to be appropriate for a sound and practical classification, are brought out, and the corresponding complete classification of flow and mass movements in mountain areas is presented. Two extreme debris flow types are thus distinguished: muddy debris flows and granular debris flows. A critical review of recent advances in debris flow dynamic is then proposed. It is pointed out that adequate work must be carried out in the field of non-Newtonian fluid mechanics. In particular, one fundamental rheological property of debris flow materials is the yield stress, which explains thick deposits on steep slopes and can be inferred from field measurements. Furthermore it can be used to estimate viscous dissipation within the bulk during flow. Relevant models predicting muddy debris flow dynamics are already available whereas further progress is needed concerning granular flows.