Abstract
Underwater investigations at Lake Mead, Chicago, Passamaquoddy Bay, and on Long Island established the characteristics of sound waves that can be used in shallow geophysical exploration by the sonar method. At Lake Mead the sediments were for the most part clay of high water content which was easily penetrated by low-power sound at a frequency of 14.2 kilocycles. The greatest depth of penetration was 140 feet. Sound having frequencies of 50 and 80 kilocycles did not penetrate. At Chicago, sound at a frequecy of 11 kilocycles and an output power of 800 watts gave a satisfactory delineation of bedrock beneath Lake Michigan. The maximum distance to bedrock was about 135 feet. At Passamaquoddy Bay a sound frequency of 6 kilocycles and about 700 watts of output power gave much better delineation of bedrock. A frequency of 6 kilocycles at the lower output power was much better than 11 kilocycles at higher power. About 250 feet of penetration was attained. Pulsed power was used in each of these investigations. The pulse lengths were long—about 14–25 milliseconds. Bedrock was mapped at Lake Mead, Chicago, and Passamaquoddy Bay. The methods of ordinary hydrographic surveying were used for horizontal and vertical positioning. For horizontal positions the ordinary three-point sextant-fix method was used. For vertical positioning, recording gages suitably placed and supplemented by staff gages were used. All data were tied into the third-order control net of the U. S. Coast and Geodetic Survey. In connection with a study for a proposed Midwestern waterway, the technical problem was reviewed and the techniques considerably improved. New equipment was built and evaluated on Long Island Sound. It operated with pulsed power at a frequency of 6 kilocycles, and pulse length was controlled and variable from 1 to 9 milliseconds. Output acoustic power was about 2500 watts. With the transducer in ordinary operating positions as much as 400 feet of sediment was penetrated. With the transducer placed directly on the bottom of the water in Huntington Bay about 750 feet of penetration was attained. Several innovations in sonar techniques, which are desirable for sediment exploration, and which give much more detailed information than the earlier equipment are described. The techniques required for stratigraphic interpretation of the sound records are described briefly. A method for the determination of sound velocities is discussed. Multiple echoes and other effects complicate the interpretation of records and are explained. The problems of geological control encountered also are mentioned.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.