Abstract
Since the last IAEA Fusion Energy Conference in 2016, the EAST physics experiments have been developed further in support of high-performance steady-state operation for ITER and CFETR. First demonstration of a >100 s time scale long-pulse steady-state scenario with a good plasma performance (H98(y2) ~ 1.1) and a good control of impurity and heat exhaust with the upper tungsten divertor has been achieved on EAST using the pure radio frequency (RF) power heating and current drive. The EAST operational domain has been significantly extended towards a more ITER and CFETR related high beta steady-state regime (βP ~ 2.5 and βN ~ 1.9 of using RF and NB and βP ~ 1.9 and βN ~ 1.5 of using pure RF). A large bootstrap current fraction up to 47% has been achieved with with q95 ~ 6.0–7.0. The interaction effect between the electron cyclotron resonant heating and two lower hybrid wave systems has been investigated systematically, and applied for the improvement of current drive efficiency and plasma confinement quality in the steady-state scenario development on EAST. Full edge-localized mode (ELM) suppression using the n = 2 resonant magnetic perturbations has been achieved in ITER-like standard type-I ELMy H-mode plasmas with a range of the edge safety factor of q95 ≈ 3.2–3.7 on EAST. Reduction of the peak heat flux on the divertor was demonstrated using the active radiation feedback control. An increase in the total heating power and improvement of the plasma confinement are expected using a 0D model prediction for a higher bootstrap fraction. Towards a long-pulse, high bootstrap current fraction operation, a new lower ITER-like tungsten divertor with active water-cooling will be installed, together with further increase and improvement of heating and current drive capability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.