Abstract
Preparation of high-quality protein crystals is a major challenge in protein crystallography. Natural convection is considered to be an uncontrollable factor of the crystallization process at the ground level as it disturbs the concentration gradient around the growing crystal, resulting in lower-quality crystals. A microfluidic environment expects an imitated microgravity environment because of the small Gr number. However, the mechanism of protein crystal growth in the microfluidic device was not elucidated due to limitations in measuring the crystal growth process within the device. Here, we demonstrate the real-time measurement of protein crystal growth rates within the microfluidic devices by laser confocal microscopy with differential interference contrast microscopy (LCM-DIM) at the nanometer scale. We confirmed the normal growth rates in the 20 and 30 μm-deep microfluidic device to be 42.2 and 536 nm/min, respectively. In addition, the growth rate of crystals in the 20 μm-deep microfluidic device was almost the same as that reported in microgravity conditions. This phenomenon may enable the development of more accessible alternatives to the microgravity environment of the International Space Station.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.