Abstract

Medical applications of radiation have been widely spread until now. However, the exposure of medical staff is sometimes overlooked, because treatment of patients is the first priority. The purpose of this study is to develop a small and light monitor that can measure the energy spectrum and dose of gamma-rays at the same time in real-time for medical applications. Using the monitor, the medical staff could be guided to be more aware ofthe risk of radiation, and finally the exposure to them could be substantially suppressed. So far, a CsI scintillator has been chosen as a detection device of gamma-rays and combined with a Multi-Pixel Photon Counter (MPPC) to develop a prototype monitor. Then we confirmed its basic performance with standard gamma-ray sources. To achieve the real-time measurement, α method (sequential Bayesian estimation) was adopted and improved to propose a new unfolding process, named k-α method, with which the convergence speed could really be accelerated to realize real-time measurement. Also, gamma-ray measurements with a mixed source of 133Ba, 137Cs and 60Co were carried out to confirm the validity of the present monitor. As a result, it was found that gamma-ray energy spectrum could be estimated successfully in several-tens seconds in the field of around 6 μSv/h. For the dose estimation, the correct values could be estimated just after starting measurement.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.