Abstract
The wind tunnel test is one of the most reliable methods for evaluating the dynamic response of high-rise buildings in regards to wind-structure interaction. In conventional aeroelastic wind tunnel tests the calibration of stiffnesses, masses and the damping properties of a scaled specimen is required. This takes extensive time and effort, especially when the tests need to be repeated with various geometric designs during design iterations. This study introduces a new testing method that combines a numerical simulation and the conventional aeroelastic wind tunnel test through the real-time hybrid simulation method. The stiffness, damping and partial mass of a scaled building model are represented numerically, while the rest of the mass, the wind-induced pressure around the model and the wind-structure interaction are represented physically in a wind tunnel. The building model in the wind tunnel rests on a base-pivoting system, which is controlled with a linear motor. The base moment induced by wind pressure and the inertial force from the mass of the physical specimen are measured; those measurements are then fed back into a numerical integration scheme. A delay-compensation scheme is implemented to minimize the effects of actuator delay on the dynamic response of the system. Several tests are carried out to validate and calibrate the developed test apparatus and control scheme including 1) tests for the identification of actuator delay, 2) free vibration tests for characterization of the dynamic properties of the hardware and the control system and 3) wind tunnel tests for system validation through aeroelastic real-time hybrid simulation. This paper presents the overall design of the experimental apparatus, the adopted delay compensation and numerical integration schemes, and a summary of the test results. Test results confirmed that the developed experimental technique can replace the conventional aeroelastic wind tunnel tests of a building model, thus improving the efficiency of the aeroelastic wind tunnel testing.
Highlights
The number of new high-rise building construction has rapidly increased due to advancements in construction technology and to house the increasing populations in urban areas
The dynamic effect of wind loads on tall buildings can be evaluated by performing computational fluid dynamics (CFD) analysis or boundary layer wind tunnel (BLWT) tests
The main objective of this paper is to propose a new design of an experimental apparatus using electric linear motor that can perform a real-time aeroelastic hybrid simulation for a single degree of freedom base-pivoting building model
Summary
The number of new high-rise building construction has rapidly increased due to advancements in construction technology and to house the increasing populations in urban areas. It is imperative to properly evaluate the dynamic response of high-rise buildings subjected to wind load at the design phase. Both static and dynamic analysis methods have been used to evaluate the response of high-rise structures under wind loads. Static analysis is usually recommended for buildings up to 50 meters in height This method cannot be applied to buildings that are tall, have a high slenderness ratio, or are susceptible to vibration under wind loads. CFD analysis cannot reliably simulate the wind fluctuation characteristics of natural winds and requires many assumptions and approximations In such situations, the response of high-rise buildings subjected to wind can be more accurately evaluated with BLWT tests
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
