Reactive particle-laden flow in industrial-scale supercritical water gasification reactor: Modeling and study on flow patterns

Abstract

Coal gasification in supercritical water (SCW) is a highly complicated reactive particle-laden flow process, which couples multiphase flow hydrodynamics, conjugate heat transfers, and complex chemical reactions. A quantitative understanding is the key issue for reactor design and optimization. In this study, the Eulerian-Eulerian model is used to describe the particles-SCW flow in a novel industrial-scale thermally integrated supercritical water gasification (TISCWG) reactor with conjugate heat transfer boundary conditions and porous media model. The sophisticated chemical reactions are using a species transport model with a seven-step lumped kinetics. Four zones of the TISCWG reactor and four typical flow patterns in the gasification chamber are firstly revealed as 1) the bottom accumulation region with the nonhomogeneous solids distribution and back-mixing of particles, 2) the upper developed fluidization region with the SCW and coal particles moving in a plug-flow regime in the center and a downward annular gravity-driven flow near the wall, 3) the jet-affected region strongly affected by the vortexes near the nozzle and presented as a trans-critical jet regime and 4) the dilute region where dilute solids slow down and fall back into the gasification zone. Flow in the gasification chamber is strongly affected by the heat transfer with the preheat zone, as reflected by an annular gravity-driven flow film flowing downwards near the gasification wall. A funnel-shaped structure promotes a more uniform distribution of solids in the accumulation region rather than a cylindrical structure. The effect of flow patterns on coal gasification processes is also studied. Volatile pyrohydrolysis reactions depend on the time-varying solids distribution and the gaseous products at the system outlet with a typical H2 mole fraction of 61.42% and CO2 of 34.98%.