Reactive control of velocity fluctuations using an active deformable surface and real-time PIV

Abstract

Listen

Translate article

This study demonstrates an experimental realization of turbulence control strategies previously explored by Choi et al. (J. Fluid Mech., vol. 262, 1994, pp. 75–110) through numerical simulations. To conduct the experiments, a deformable surface with a streamwise array of 16 independently controlled actuators was developed. A real-time particle image velocimetry (RT-PIV) system was also created for flow measurements. The objective of the control strategy was to target the sweep and ejection motions of the vortex shedding from a spherical cap placed in a laminar boundary layer. Reactive control strategies consisted of wall-normal surface deformations that opposed or complied with the wall-normal (v) or streamwise (u) velocity fluctuations obtained from the RT-PIV. The results showed two primary outcomes of the control approach. Firstly, it effectively hindered the advancement of sweep motions towards the wall. Secondly, it disrupted the periodic shedding of vortices. The v-control with opposing wall motions and u-control with compliant wall motions exhibited strong inhibition of sweep motions, while the v-control with compliant and u-control with opposing wall motions showed weaker inhibition. All reactive control cases resulted in the disruption of vortex shedding. In some instances, this disruption was accompanied by increased turbulent kinetic energy due to the generation of additional flow motions. However, the v-control with opposing wall motions significantly reduced the vortex-shedding energy while maintaining total turbulent kinetic energy close to or below that of the unforced flow. Overall, the experiments show the effectiveness of reactive control strategies in mitigating sweep motions and disrupting vortical structures, offering insights for developing reactive control strategies.