Abstract
An increase in gas turbine efficiency is possible by inlet air cooling in chillers converting a heat of exhaust gas into refrigeration. In traditional absorption lithium-bromide chillers of a simple cycle an inlet air can be cooled to 15°С. More decrease of turbine inlet air temperature and greater fuel saving accordingly is possible in refrigerant ejector chiller as a simple in design and cheap. The innovative turbine inlet air cooling (TIC) system with absorption chiller as a high-temperature and ejector chiller as a low-temperature stages for cooling air to 7 or 10 °C is proposed. Its application in temperate climate provides annual fuel saving by 1.5 to 2 times higher compared with traditional air cooling in absorption chiller to 15 °C. A novel universal method of analysing the efficiency of TIC system operation and rational designing has been developed. The method involves the simple numerical simulation based on real input data of site actual climatic conditions. The annual fuel saving is chosen as a primary criterion. The novelty of the methodological approach consists in replacing the current yearly changeable fuel reduction due to TIC by its hour-by-hour summation as an annual fuel saving. The increment of annual fuel saving referred to needed refrigeration capacity of TIC system is used as an indicator to select a design refrigeration capacity. A rational design refrigeration capacity determined by applying the novel methodology allows to decrease the TIC system sizes by 10 to 20% compared with traditional designing issuing from the peaked thermal load during a year. So far as it was developed analytically by introducing quite reasonable criterion indicator and based on the simple summation procedure the method is quite applicable for designing in power and energy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.