Abstract
This study aims to create a prototype of the SCADA system used to control the lighting source facilities and a fan-based Raspberry Pi in the workshop of the Electrical Engineering Study Program of Politeknik Enjinering Indorama. This system consists of Raspberry Pi Model B, UL 2803 Driver, switch module, relay module, lamp, and fan. Raspberry Pi as a controller or mini PLC programmed using CodeSys software with the ladder logic diagram programming. The System control process can also be done through the HMI display (Human Machine Interface), HMI display is designed using Codesys Web Visualization feature so the system can be controlled through a PC or mobile web browser while connected to the campus intranet network. The results showed the prototype SCADA system that was built was able to control sources for lighting and fans both locally and remotely through a mobile or PC in real-time with an average control time of 200 ms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
