Abstract
In the present work is the deposition of copper oxide using the pulsed laser deposition technique using Reactive Pulsed Laser as a Deposition technique (RPLD), 1.064μm, 7 nsec Q-switch Nd-YAG laser with 400 mJ/cm2 laser energy’s has been used to ablated high purity cupper target and deposited on the porous silicon substrates recorded and study the effect of rapid thermal annealing on the structural characteristics, morphological, electrical characteristics and properties of the solar cell. Results of AFM likelihood of improved absorption, thereby reducing the reflection compared with crystalline silicon surface. The results showed the characteristics of the solar cell and a clear improvement in the efficiency of the solar cell in the case of copper deposition or not.
Highlights
The crystalline silicon is an important and dominant material over several years due to its well-known properties and established infra structure for photovoltaic manufacturing [1]
In the present work is the deposition of copper oxide using the pulsed laser deposition technique using Reactive Pulsed Laser as a Deposition technique (RPLD), 1.064μm, 7 nsec Q-switch Nd-YAG laser with 400 mJ/cm2 laser energy’s has been used to ablated high purity cupper target and deposited on the porous silicon substrates recorded and study the effect of rapid thermal annealing on the structural characteristics, morphological, electrical characteristics and properties of the solar cell
The results showed the characteristics of the solar cell and a clear improvement in the efficiency of the solar cell in the case of copper deposition or not
Summary
In the present work is the deposition of copper oxide using the pulsed laser deposition technique using Reactive Pulsed Laser as a Deposition technique (RPLD), 1.064μm, 7 nsec Q-switch Nd-YAG laser with 400 mJ/cm laser energy’s has been used to ablated high purity cupper target and deposited on the porous silicon substrates recorded and study the effect of rapid thermal annealing on the structural characteristics, morphological, electrical characteristics and properties of the solar cell. Results of AFM likelihood of improved absorption, thereby reducing the reflection compared with crystalline silicon surface. The results showed the characteristics of the solar cell and a clear improvement in the efficiency of the solar cell in the case of copper deposition or not. PLD, Cu2O, Surface morphology, Solar cell properties. الأكسدة الحرارية السريعة للتراكيب النانوية لاغشية اوكسيد النحاس في تصنيع الخلايا. الخلاصة حيث تم استخدام ليزر،في العمل الحالي تم ترسيب أكسيد النحاس باستخدام تقنية الترسيب بالليزر النبضي نانو ثانية و بطاقة7 مايكرومتر و امد نبضة1.06 نديميوم ياك النبضي يعمل بضابط عامل نوعية بطول موجي لغرض اجراء عملية الاستئصال لسطح معدن النحاس عالي النقاوة والترسيب على سطح2سم/ملي جول400 حيث تم دراسة تأثير التلدين الحراري السريع على الخصائص التركيبية والسطحية.القواعد السليكون المسامي مما يقلل، احتمال تحسين الامتصاصAFM اظهرت نتائج.والخصائص الكهربائية وخصائص الخلية الشمسية من الانعكاس مقارنة مع سطح السيليكون البلورية و أظهرت النتائج تحسن واضح بخصائص الخلايا الشمسية
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call