Abstract

Antimony selenide (Sb2Se3) has demonstrated considerable potential and advancement as a light-absorbing material for thin-film solar cells owing to its exceptional optoelectronic characteristics. However, challenges persist in the crystal growth, particularly regarding the nucleation mechanism during pre-selenization process for Sb2Se3. The defects originating from this process significantly impact the quality of the absorber layer, leading to the degradation in the power conversion efficiency (PCE) of the device. Herein, the evolution of pre-selenization using rapid thermal processing (RTP) on the crystallization quality of Sb2Se3 film is systematically investigated. By optimizing the initial nucleation process during pre-selenization, resulting in a reduction of grain boundaries and nucleation centers, the Sb2Se3 thin films demonstrate enhanced crystallinity and pinholes-free morphology. It is found that the improved quality of the grain interior and interfaces of the Sb2Se3 absorber can mitigate intrinsic defects within the bulk layer, and passivate interfacial defect recombination. As a result, the short circuit current density (JSC) is elevated to 28.97mA cm-2, and a competitive efficiency of 9.03% is achieved in Sb2Se3 device. This study provides comprehensive insight into the process of crystal growth and the mechanism for defect suppression, which holds guiding significance for advancing photovoltaic performance.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.