Abstract

The accurate determination of cadmium (Cd) hosted and accumulated in sedimentary carbonate remains challenging due to its low concentration (ng·g−1) and complex matrix. Conventional methods, such as inductively coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GF-AAS), which typically rely on liquid sampling and sample digestion, are tedious, labor-intensive and time-consuming. In this study, a rapid and sensitive method for the direct determination of carbonate-hosted Cd was developed based on solid sampling electrothermal atomic absorption spectrometry (SS-ETV-AAS). This method eliminates the need of acid digestion procedure, allowing the entire analysis, including sample preparation, to be completed within 10 min. To minimize the carbonate matrix effect, ethylene diamine tetra acetic acid disodium salt (EDTA-2Na) was proposed as matrix modifier to facilitate the release of Cd, enabling fast and accurate determination of trace Cd in carbonate samples. Under optimized conditions, the Cd detection limits was found to be as low as 0.17 ng·g−1, and repeatability (relative standard deviation, RSD) was better than 8 % (n = 7). The accuracy of the proposed SS-ETV-AAS was verified by analyzing five carbonate certified reference materials (GBW07127, GBW07129, GBW07130, GBW07135 and JDo-1), two soil certified reference materials (GBW07404a, GBW07405), as well as several actual carbonate samples. All these results demonstrate that the proposed SS-ETV-AAS method provides a simple, rapid and sensitive approach for measuring trace Cd in carbonates.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call