Abstract
Ramp-wave compression experiment to balance the high compression pressure generation in aluminum and x-ray blanking effect in transparent window is demonstrated with an imaging velocity interferometer system for any reflector (VISAR) on ShenGuang-III prototype laser facility. The highest pressure is about 500 GPa after using the multilayer target design Al/Au/Al/LiF and 1013 W/cm2 laser pulse illuminated on the planar Al target, which generates the spatial uniformity to over 500 μm on the ablation layer. A 2-μm-thick Au layer is used to prevent the x-ray from preheating the planar ablation Al layer and window material LiF. The imaging VISAR system can be used to record the abrupt loss of the probe beam ( nm) caused by absorption and reflection of 20-μm, 30-μm and 40-μm-thick Al, i.e., the blanking effect. Although there are slight shocks in the target, the peak pressure 500 GPa, which is the highest data up to now, is obtained with ramp-wave compression.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
