Abstract
The low power output and high phosphoric acid (PA) leakage are the main constraints restricting the commercialization of PA-doped high-temperature proton exchange membranes (HT-PEMs). Ionized imidazoles have been shown to be an effective strategy to improve PA retention, however, less research has been conducted on the fractional free volume (FFV) of the backbone of the main chain on PA loss. Herein, novel imidazolium ions polymer (PQBN-4-IM) material with bulky binaphthyl (BN) group was prepared as PA-doped HT-PEM using a one-step superoxid acid catalyzed polycondensation and subsequent methylation process. The rigidity and hydrophobicity of the BN group promote PQBN-4-IM PEM to produce more obvious microphase separation morphology and large FFV, which is beneficial for forming better ion transport channels and excellent PA interaction. Notably, the PA-doped PQBN-4-IM (PQBN-4-IM/PA) membrane has the highest proton conductivity (90.26 mS cm−1, 180 ℃) and peak power density (PPD) (802.5 mW cm−2, 180 ℃) than PQTP-4-IM/PA and m-PBI/PA HT-PEMs. Moreover, the PQBN-4-IM/PA membrane has higher PA retention at 80 ℃/40 % relative humidity (RH), 40 ℃/60 % RH, or immersed in water due to enhancement on ion-pair interactions by microstructure. Under the accelerated stress test (AST) of the fuel cell (FC), the PQBN-4-IM/PA membrane loses only 12.22 % of PPD after 200 cycles at 80 ℃, which exhibits higher PPD retention than that of the PQBP-4-IM/PA (70.23 %), PQTP-4-IM/PA (74.36 %) and m-PBI/PA (65.25 %) membranes, and shows excellent durability of cell performance for more than 1000 h without significant voltage decay at 160 °C. Thus, the outstanding performance suggests that the microstructure and morphology of imidazolium ions polymer membranes significantly influence proton conductivity, performance, and the durability of a cell.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call