Abstract
Two validated high-performance liquid chromatography (HPLC) and capillary electrophoresis (CE) assays for insulin are compared. Both methods are selective and robust, with best reproducibility in a 0.9% sodium chloride solution, pH 7–8, as the sample solvent. It is shown that, besides sample solvent and buffer pH, acetonitrile volatility is a crucial point for reproducibility. Its high importance for selectivity and ruggedness is also stressed. Trends have been extensively investigated and characterized. The separation efficiency is better for the CE method. Furthermore, the analysis time of the CE method is up to four times shorter than the respective parameter in HPLC and the acetonitrile consumption is more than 100-fold less. Earlier works stated that all relevant precision data, such as relative signal standard deviation (1.6% R.S.D. for peak areas, n=20), precision of the analytical result and the limit of quantitation, were about a factor of two worse than for corresponding HPLC data (0.8% R.S.D. for peak areas, n=19). This CE precision was further improved using relative instead of absolute peak areas, which compensate for the injection error (1.3% R.S.D. for relative peak areas, n=20). If acetonitrile evaporation is avoided, by covering the buffer with mineral oil, reproducibility is even better than with the HPLC assay (0.5% R.S.D. for relative peak areas, n=60).
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call