Quantifying strong point sources emissions of CO2 using spaceborne LiDAR: Method development and potential analysis

Abstract

Accurate reporting of point source emissions of CO2 is fundamental to addressing climate change. Currently, bottom-up verification methods based on inventory statistics face significant challenges in this area. Satellite remote sensing has emerged as a promising approach for cost-effective global-scale verification of point source emissions, with spaceborne LiDAR offering high spatial resolution ideal for this purpose. However, the inversion of CO2 emissions from spaceborne LiDAR CO2 concentration observations requires urgent attention, as existing methods heavily rely on prior information in diffusion models and the accuracy of meteorological data. In this work, a novel emission inversion method based on genetic algorithms and trust-region techniques is proposed to estimate CO2 emissions from point sources using spaceborne LiDAR observations. A comparison between the CO2 emission rates calculated from actual airborne LiDAR data (as a prototype of spaceborne LiDAR) and emission inventories for the Suizhong power plant showed a deviation of less than 7.0%. Observing system simulation experiment (OSSE) demonstrated that using DQ-1 (spaceborne LiDAR) observation data as input, the relative error of emission rates would be less than 0.6% when the distance between the emission source and the observation footprint is less than 10 km. Furthermore, the developed model mitigates the impact of uncertainties in meteorological data and IPDA (Integrated-Path Differential Absorption) LiDAR measurements on the final emission quantification. The proposed approach is expected to enable DQ-1 to provide affordable and accurate carbon verification services for over 20.0% of the world's strong point source emissions.