Abstract
Thermally induced damage due to microwave heating of mineral ore particles was simulated numerically using a continuum approach. Particles were represented as dispersions of microwave-absorbing grains in a non-absorbing matrix. As the aim of microwave treatment of ores is liberation of the absorbing grains from the matrix rather than bulk damage to the particle, damage was quantified by comparing the tensile stress in the zones surrounding the absorbing grains with the tensile strength of the matrix. Through comparison of two different ores it was shown that the most energy-efficient method of maximising grain boundary damage is by increasing the microwave power density and decreasing the treatment time. The amount of damage incurred at a specific power density and energy input was dependent on the ore mineralogy and its texture. More grain boundary damage was induced in coarser textured ores for the same energy input and damage was maximised for ores with microwave-absorbing grains with a large thermal expansion coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chemical Engineering and Processing: Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.