Abstract
Membrane introduction mass spectrometry (MIMS) was developed and verified for the direct quantification of cyanogen chloride (CNCl) and cyanogen bromide (CNBr) in environmental samples without any sample workup. Factors including the membrane temperature and the liquid flow rates were examined for system optimization. The MIMS method provided linear responses for three orders of magnitude of concentrations. The instrument detection limits of CNCl and CNBr were 1.2 and 3.8 μg/L, respectively, and the method detection limits of CNCl and CNBr were both 1.7 μg/L. Effects of pH and the water matrix including synthetic water, saline water, natural surface water, and wastewater, on the responses were also examined. A pH ranging from 3 to 10 did not affect the quantification. The average recoveries of CNCl and CNBr in the water matrixes tested were 98.5% and 92.7%, respectively. The use of the MIMS method in on-line monitoring of the formation of cyanogen halide was demonstrated in chlorination of aqueous solutions containing glycine and bromide ions. The results indicated the important role of bromide ions in cyanogen halide speciation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.