Abstract
This study investigates the yield and quality of bio-oil produced from catalytic and non-catalytic pyrolysis of microalgae Chlorella vulgaris using Ni supported zeolite (Si/Al = 30) prepared by two different methods, ion exchange (IE) and wet impregnation (WI) to examine the effect of catalyst preparation methods on the bio-oil quality. The experiments were also conducted to investigate the effect of different temperatures (300–600 °C) and catalyst to algae ratio (1:5, 1:2, 1:1 and 2:1) on the yield and quality of bio-oil. The results showed that catalytic pyrolysis using Ni supported zeolites produced high hydrocarbon, less oxygenated and acid compounds compared to non-catalytic pyrolysis. The catalyst preparation method did not affect the yield but had an effect on the bio-oil composition. The results obtained from this study are useful in developing the catalytic pyrolysis process to refine bio-oils for commercial use.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
