Abstract
This article is devoted to the research of dispersion-strengthened composite materials based on aluminum such as SAP to ensure their quality management. The orthogonal central composite design is used to analyze the composition and properties of aluminum-based DSCM. The mathematical models depending of the elongation and tensile strength of the various SAP on the temperature and the content of aluminum oxide Al2O3 are built.Analysis of the mathematical models of obtained response surfaces showed that the tensile strength for SAP is most dependent on the temperature of the test sample (operating temperature) and Al2O3 content does not impact. As for the elongation of the samples, it is almost equally as dependent on the temperature of the test (operation), and the content of Al2O3. It has been established that the increase in the Al2O3 content and the temperature of test samples leads to decrease of tensile strength and elongation of aluminum-based DSCM.The results can be applied for the selection of the necessary materials in the production of equipment at a known operation temperature, as well as for compromise optimization of researched parameters for quality management of composite alloys such as SAP.
Highlights
В статье представлен анализ состава и свойств различных дисперсноупрочненных компо зиционных материалов на основе алюминия, применяемых при производстве аэрокосмической техники.
Проведен анализ свойств данных материалов для обеспечения управления их качеством.
Их применение очень важно для таких отраслей промышленности как автомобилестроение, авиация, производство космической техники, гражданское строительство и т.
Summary
В статье представлен анализ состава и свойств различных дисперсноупрочненных компо зиционных материалов на основе алюминия, применяемых при производстве аэрокосмической техники. Проведен анализ свойств данных материалов для обеспечения управления их качеством. Их применение очень важно для таких отраслей промышленности как автомобилестроение, авиация, производство космической техники, гражданское строительство и т. Д. На данный момент в общем случае существует 2 вида композиционных материалов, применяемых для этих целей: 1) КМ с металлической матрицей; 2) КМ с неметаллической матрицей.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
