Abstract
A novel hydrogen gas sensor based on platinum-titanium-oxygen gate silicon-metal-insulator-semiconductor field-effect transistors (FETs) was developed. The sensor has a unique gate structure composed of titanium and oxygen accumulated around platinum grains on top of a novel mixed layer of nanocrystalline TiOx and super heavily oxygen-doped amorphous titanium formed on SiO2/Si substrates. The sensing amplitude, ΔVg(V), of the FET hydrogen sensor is well fitted by a linear function of the common logarithm of air-diluted hydrogen concentration C(ppm), i.e., ΔVg(V)=0.355log C(ppm)-0.610, between 100 ppm and 1%. The gradient of 0.355 V/decade at 115°C is about ten times higher than the expected 38.5 mV/decade from Nernst equation. The threshold Voltage (Vth) of FETs is reproducible, and shows excellent uniformity over the 5-inch wafers, 3σVth of 178 mV. Packaged sensors working at 115 °C typically show power consumption of 122.5 mW at room temperature environments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.