Abstract
Very low resistance nonalloyed ohmic contacts of Pt/Ti to 1.5×1019 cm−3 Zn-doped In0.53Ga0.47As have been formed by rapid thermal processing. These contacts were ohmic as deposited with a specific contact resistance value of 3.0×10−4 Ω cm2. Cross-sectional transmission electron microscopy showed a very limited interfacial reacted layer (20 nm thick) between the Ti and the InGaAs as a result of heating at 450 °C for 30 s. The interfacial layer contained mostly InAs and a small portion of other five binary phases. Heating at 500 °C or higher temperatures resulted in an extensive interaction and degradation of the contact. The contact formed at 450 °C, 30 s exhibited tensile stress of 5.6×109 dyne cm−2 at the Ti/Pt bilayer, but the metal adhesion remained strong. Rapid thermal processing at 450 °C for 30 s decreased the specific contact resistance to a minimum with an extremely low value of 3.4×10−8 Ω cm2 (0.08 Ω mm), which is very close to the theoretical prediction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
